2-12
IM 703155-01E
Differential Output
Differential output models output the I/I
_
and Q/Q
_
waveforms as follows:
I:
Outputs I data of waveform data
I
_
:
Outputs an inverted waveform of I data
Q: Outputs Q data of waveform data
Q
_
: Output an inverted waveform of Q data
I or Q
I or Q
Editing Sequences «For procedures, see section 7.2»
Data that is loaded to the waveform memory is cleared when the power is turned OFF.
By registering the file names of the waveform data in a sequence list, waveform data is
loaded from the internal hard disk, CF card, or USB memory according to the order in the
sequence list simply by loading the stored sequence list file and executing transmission.
The waveform data signals of multiple files can be output sequentially by starting the
waveform generation once.
Data That Can Be Registered
Waveform data stored on the internal hard disk (binary data, CSV data, or raw data)
Elements
Up to 128 file names of waveform data can be registered
Data Length
Displays the data length of the waveform data.
Repeat Count
You can specify the number of times to repeat the waveform data output. You can also
specify infinite number of times.
No Signal Period
The no signal period contains no waveform data. Only the offset voltage is output.
There is no data that is loaded to the waveform memory.
Output
waveform
Data in the
waveform
memory
Sequence
list
No.
1
2
3
4
Element
Waveform data A
Waveform data B
No signal period
Waveform data C
Data Length
256
512
256
256
Repeat Count
2
1
1
1
Wave. data A
Wave. data A Wave. data A
Wave. data B
Wave. data C
Wave. data B
Wave. data C
No signal period
Repeat count
1
Repeat count
1
Repeat count
2
Waveform data is loaded from the internal hard
disk to the waveform memory according to the
sequence list. No signal period is not loaded.
2.5 Outputting Waveforms and Editing Sequences
