UTAdvanced UT35A/UT32A
Introduction
Brief Description of Sheets
This sheet provides a brief description of the following sheets entitled "Names and Functions of Display Parts,"
"Operation Parameter Map," "Setup Parameter Map," and "List of Parameters."
"Names and Functions of Display Parts"
This sheet describes the names and functions of display parts, function of parameter display level, meaning of
parameter map symbol and numeric value, parameter display transition and setup operation, and display symbol
list.
"Operation Map (PRO)"
This sheet describes the operation parameter map, which can be used as an operation guide.
"Setup Map (PRO)"
This sheet describes the setup parameter map, which can be used as an operation guide.
"List of Parameters (PRO)"
This sheet describes the setting range and initial value of operation parameters and setup parameters. There is a
column for user settings.
Parameters in the sheets are displayed when the parameter display level is set to professional setting mode
(LEVL=PRO). Some parameters are not displayed according to model and suffix codes. For details, refer to the
User's Manual.
Operation Parameters: Parameters for setting the functions necessary for the operation.
Setup Parameters: Parameters for setting the basic functions of the controller.
Notice
The contents of this manual are subject to change without notice as a result of continuing improvements to the
instrument’s performance and functions.
Page 2 / 18
