18
TI 01W06A51-50EN
Mar.26,2019-00
5.4
Message Transfer Settings
This section describes the setting required to transfer Sushi Sensor data received by the gateway
to the application. To configure this setting, use the “Node-RED” software that runs on the Web
browser. Node-RED, combined with functions called “nodes”, offers a visual programming
environment. In this section, “nodes” are referred to as “blocks”.
NOTE
• In order to configure the message transfer settings, configuration information (URL, user
name, and password) of the application that is the connection destination is required. Before
starting the gateway setting procedure, check the application setting.
(1) Access the gateway via the Web browser, and log in to the gateway.
(2) Click [Apps].
(3) Check the [Enabled] check box, and click the [Launch Node-RED] button. Then, the
screen changes to another page.
NOTE
• Clicking the [Launch Node-RED] button may display a security certification error window. In
such a case, continue to a site browsing.
(4) The Node-RED login page opens. The login user name and password are the same as
those required to log in to the gateway.
(5) Drag and drop the “lora” block from the left pane to the sheet (Sheet1) in the center.
Double-click the “lora” block you have placed.
(6) Configure the following settings in the [Edit lora node] window. After configuring the
settings, click the [OK] button.
Item
Value
Name
Arbitrary character string (Example:
lora)
Data Type
Bytes