17
TI 01W06A51-50EN
Mar.26,2019-00
5.3.2
Ethernet Settings
The default IP address is set to the Ethernet port of this gateway. When the IP address and/or
default gateway setting must be changed to match the installation network, follow the procedure
below to change the setting(s).
(1) Access the gateway via the Web browser, and log in to the gateway.
(2) Click [Setup] to display the sub menu. Click [Network Interfaces].
(3) Change the [eth0] setting. Click [Pencil icon] in [Options].
(4) Specify the IP address and other items of the gateway. Specify the following items, and
click the [Finish] button.
Item
Value
Direction
LAN
Mode
Static
IP Address
IP address to be set to the gateway
Mask
Net mask of the IP address to be set
Gateway
IP address of the default gateway (if
necessary)
Primary
DNS
Server
IP address of the primary DNS
server (if necessary)
Secondary
DNS
Server
IP address of the secondary DNS
server (if necessary)
(5) Click the [Submit] button.
(6) Click [Save and Restart] to restart the gateway.
If you change the IP address of the gateway, you will not be able to access the gateway from the
gateway configuration PC. In order to log in to the gateway again, change the IP address of the
PC so that the PC is included in the same network as the IP address of the gateway.
When specifying the URL including the host name as the transfer destination in the message
transfer setting, set the IP address of the DNS server. This setting is not required when the IP
address is used to specify the data collection server.