12-40
IM 253710-01E
Explanation
CAUTION
Never remove the medium (disk) or turn OFF the power while the access
indicator or the
mark is blinking. It can damage the medium or destroy the
data on the medium.
Selecting the medium and directory
See the explanation given in “Selecting the medium and directory” in section 12.5.
Selecting the file attribute
See the explanation given in “Selecting the file attribute” in section 12.8.
Changing the medium/directory/file name
The assignment of names when changing the medium/directory/file name is the same
as the explanation given in “File name/comment” in section 12.5.
Creating a directory
A new directory can be created on a medium. The assignment of the directory when
creating a new directory is the same as the explanation given in “File name/comment”
in section 12.5.
Specifying the file to be displayed in the File List dialog box
See the explanation given in “Specifying the file to be displayed in the File List dialog
box” in section 12.8.
Properties
See the explanation given in “Properties” in section 12.5.
Note
•
You cannot rename a directory/file or create a new directory while the data acquisition is in
progress (START/STOP indicator is ON).
•
Directory attributes cannot be changed.
•
If a file with the same name exists in the same directory, renaming is not allowed.
•
If a directory with the same name exists in the same directory, the directory cannot be
created.
•
When [File Item] is [Wave], [Data Type] is [Binary], and [Filter] is [Item], renaming the name of
the selected file with a .WVF extension causes the file with the same name with the .HDR
extension to be changed. When [Filter] is [All], only the selected files are changed.
12.10 Changing the Directory/File Name, Creating a Directory