IM 12B7J1-01E
< 2. Installation >
2-1
2. Installation
2.1
Preparation for Installation
2.1.1
Unpacking and Inspection
The Model PH8EFP pH sensor is well packed so as to prevent damage during shipment.
After removing the sensor from its shipping container, visually check the sensor for damage.
Check also the order was delivered correctly by identifying the information on the nameplate
attached on the sensor body.
NOTE
1. When delivered, the "glass electrode" and the "liquid junction" are packed separate from the
sensor body.
2. At this time, DO NOT take away the caps of the “glass electrode” or pull “glass liquid
junction” out of the package yet to prevent them from being dried.
Made in Japan
No.
PH8EFP -
MODEL
F2.1.ai
03-TN-TT1-N-T*A
Figure 2.1
An Example of Model Number Entering to Nameplate
F2.2.ai
Glass Electrode
Liquid Junction
Solution Ground tip
Sensor Body
Figure 2.2
Names of PH8EFP pH Sensor Components
12th Edition : Dec.14,2018-00
