YOKOGAWA MT300 Getting Started Manual Download Page 59

Page: 59 / 89

5-2

IM MT300-02EN

5.2 Error Code Descriptions and Corrective

Actions

This section explains error codes that may appear on the front panel.

Error Codes

If any of the following error codes appears, the instrument will beep intermittently. Immediately turn off
the power. Servicing is required.

Code

Description

904

The internal power supply is abnormal.

Error Codes That Appear at Power-on or during the Self-test

If any of the following error codes appears, servicing is required. If the error appears at power-on, the
instrument beeps.

Code

Description

920

CPU board error.

921

CPU board error.

922

CPU board error.

923

CPU board error.

924

CPU board error.

952

Internal lithium battery failure, or error detected in stored data.The stored data will be initialized.

953

Error detected in zero calibration value or zero calibration history. The zero calibration value will be set to

its default value.

954

Error detected in DMM adjustment value or calibration date.

955

Error detected in DA adjustment value or calibration date.

956

Error detected in the adjustment value of pressure sensor unit or the calibration date.

957

Error detected in the adjustment value of pressure calculation unit or the calibration date.

958

Failed to detect pressure sensor.

959

Hardware error detected in the pressure measurement section.

Warning Codes

Code

Description

Corrective Action

Reference

Section

Detected a current overload.

Check the connection conditions or load.

4.5*

Detected an unexpected battery.

Connect a regular battery.

2.4

Extremely low battery level.

Connect the AC power supply, or turn off the

power.

2.3

Hardware error detected in the pressure

measurement section.

If this display persists, servicing is required.

–

Hardware error detected in the DMM

measurement section.

If this display persists, servicing is required.

–

Invalid reference pressure value.

Check that the reference pressure is entered

correctly.

2.6

Attempted to perform an operation not

allowed in the instrument’s current mode.

Check for errors in the operation.

–

Data store memory full.

Delete unnecessary measurement data.

5.3*

Creating CSV file.

–

Overrange or overflow occurred in the

measured pressure value.

–

File ID and stored data not found.

–

Please reboot the instrument.

–

* See the user’s manual (IM MT300-01EN), which is included in the accompanying CD.

Summary of Contents for MT300


























































































Search results

Summary of Contents for MT300

Reviews:

YOKOGAWA MT300, Getting Started Manual, Page: 59 / 89

Search results

Summary of Contents for MT300

Reviews: