manualshive.com logo in svg

YOKOGAWA MT300, Getting Started Manual, Page: 36 / 89

Share
Download
YOKOGAWA MT300 Getting Started Manual Download Page 36

Measurement Preparation

2.3  Connecting the Power Supply and Turning the Power Switch On and Off

2-9

IM MT300-02EN

1 

2 

3 

4 

5 

6 

App

Index

Operations Performed When the Power Is Turned On

When the power switch is turned on, a self-test starts automatically.
When the self-test completes successfully, the instrument will be configured with the settings that were 
in use immediately before the power was turned off.

Note

•  After turning the power off, wait at least 10 seconds before you turn it on again.
•  It may take a few seconds for the startup screen to appear.

When the Power-on Operation Does Not Start Normally

•  Turn off the power switch, and check the following items.

•  Check that the power cord is securely connected.
•  The correct voltage is coming to the power outlet (see the previous page).

•  If the instrument still does not work properly after checking these items, contact your nearest 

YOKOGAWA.

To Make Accurate Measurements

Allow the instrument to warm up for at least 5 minutes after turning on the power.

Summary of Contents for MT300


























































































Reviews:

No comments