IM 12B06K07-E-E
The outputs and the inputs are assigned as follows:
No. Output
Connection
1
Fitting drive 0=Service 1= Measurement
70/71
2
Drain valve
72/73
3
Cleaning I and Cleaning Pump I valve
74/75 21/22
4
Cleaning II and Cleaning Pump II valve
76/77 23/24
5
Output Measurement
78/79 25/26
6
Output Service
80/81 27/28
7
Output Alarm
82/83 29/30
No. Input
Connection
1
Indication measurement
62/63
2
Indication service
64/65
3
Input Start signal
11/12 66/67
4
not assigned
Change Code
In the system mode
Change Code
, the pass codes
are set. The following display is shown:
Change Code
Code Manual Mode
Code Parameter
Code System
UP
DOWN
If you change or forget a pass code, you
block the system access. Write the set
values down and store them at a safe place.
Select the desired function by means of the soft
keys and confirm with Enter.
The following display is shown:
Input Manual Code
0 0 0 0
UP
DOWN
NEXT
Enter the pass code by setting the respective digits
with the UP and DOWN buttons and by switching to
the right with the NEXT button.
As soon as the pass code has been entered
completely and correctly, save the new code by
confirming with Enter.
By pressing the ESC button, you leave the menu
without saving!
Proceed correspondingly for the remaining
pass codes!
CAUTION!
DANGER!
WARNING!
CAUTION!
DANGER!
WARNING!
