<7. General Specifications>
7-77
IM 01C25W01-01EN
Accessories*
7
Gasket
Gasket Material
(Spiral Gasket)
[Hoop]
[Filler]*
12
C ..............
316 SST
PTFE Teflon
S ..............
316L SST
PTFE Teflon
H ..............
Hastelloy C-276*
11
PTFE Teflon
N ..............
None
--------
N ...........
Always N
Table 9a. Combination for C10FR and C
0FW diaphragm material code
C10FR Wetted parts material code
“C”
“S”
“H”
Diaphragm material code
316 SST
316L SST
Hastelloy C-276
S
316L SST
●
●
●
H
Hastelloy C-276*
11
#
●
●
●
T
Tantalum
-
-
-
U
Titanium
-
-
-
M
Monel
-
-
-
K
Nickel
-
-
-
V
316L SST
(Thickness: 0.0055 inch (0.14 mm))
●
●
●
J
Hastelloy C-276*
11
#
(Thickness: 0.006 inch (0.15 mm))
●
●
●
●: Applicable, -: Not applicable
*1:
When selecting Gasket usage code H (for high temperature use), drain/vent are welded to the ring.
*2:
When selecting Gasket usage code 2 (for high temperature and high vacuum use), drain/vent are welded to the ring.
*3:
Applicable for EJXC81A, EJAC81E, EJXC50A and EJAC50E.
*4:
Applicable for EJXC80A and EJAC80E.
*5:
Applicable for EJXC40A.
*6:
Not applicable to different process connection size between C10FR and C
0FW.
*7:
Not attached Gasket. Gasket code is always “N”
*8:
In case where sealing face code J (Ring type joint), the gasket contact surface code must be selected 2.
*9:
Not applicable for sealing face code J (Ring type joint).
*10: Not applicable for Wetted parts material code H.
*11: Hastelloy C-276 or ASTM N10276
*12: When specified usage code H, filler material is Inorganic type.
*13: Not applicable for gasket contact surface code 1.
*14: Not applicable for optional code /K31 and /K35.
