3. Cabling
3-80
TI 33Q01J10-01E
Structure of Clamp Filter and Mounting
1. Unlock the two core lock claws by hand, and the core will open about 150° and split into two
pieces as shown in the figure below.
F030721.ai
Lock Two Claws
Clamp with Cable Fastener
Cable Fastener
RS-232C Cable
Core
Core Lock Claw
Cable Connector
Figure Structure of Clamp Filter and Mounting
2. Put the RS-232C cable into the cylindrical part of the opened core.
3. Close the core with the RS-232C cable within it, and lock the clamp filter with two core lock
claws.
4. Pass a cable fastener into either hole in the clamp filter and secure the RS-232C cable by
clamping the cable fastener over the cable coating.
IMPORTANT
The clamp filter consists of a ferrite core. Avoid mechanical shocks to it such as by dropping it,
and keep it within the temperature ranges during operation and storage.
May 18, 2007-00
