IM 12B06W03-01E-E
1
Thank you for purchasing the BA11 Active
Junction Box.
Please read this Instruction Manual carefully
before installing and using the BA11 Active
Junction Box.
Please also read the instructions that are
associated with the sensors and devices
you are connecting to the junction box. The
purpose of these user’s manuals is not to
warrant that the product is well suited to any
particular purpose but rather to describe the
functional details of the product.
No part of the user’s manuals may be
transferred or reproduced without prior
written consent from Yokogawa Process
Analyzers (hereafter simply referred to
as YOKOGAWA). YOKOGAWA reserves
the right to make improvements in the
user’s manuals and product at any time,
without notice or obligation. If you have
any questions, or you find mistakes or
omissions in the user’s manuals, please
contact our sales representative or your
local distributor.
Some drawings may be partially
emphasized, simplified, or omitted, for the
convenience of description.
1. Introduction
1-1. Unpacking and Checking
Upon delivery, unpack the BA11 Active
Junction Box carefully and inspect it to
ensure that it is not damaged during
shipment. If damage is found, retain the
original packing material and immediately
notify the owner and the relevant local
Yokogawa Sales office. Make sure the
Model Code and Serial Number on the
BA11 (see figure 1) are the same as on
the packing list. Also check if option(s) that
were ordered are included and correct.
1-2. Warranty and Service
Yokogawa products are guaranteed free
from defects in workmanship and materials
under normal use and service for a period
of (typically) 12 months from the date of
shipment from the manufacturer. Individual
Sales organizations can deviate from the
typical warranty period, and the conditions
of sale relating to the original purchase
order should be consulted. Damage caused
by wear and tear, inadequate maintenance,
corrosion, or by the effects of chemical
processes is excluded from this warranty
coverage. In the event of a warranty
claim, the defective goods should be sent
(freight paid) to the Service Department
of the relevant Yokogawa Sales office for
replacement (at Yokogawa’s discretion).
1
PREFACE
Figure 1. Example of BA11 product label
