IM AQ1210-02EN
45
Setting Display Conditions (OTDR)
2.3, “Display (OTDR) Conditions” in the User’s Manual
1.
Tap
OTDR
on the MENU screen.
2.
Press
SETUP
to display the setup screen.
3.
Tap the
OTDR
tab to display the following screen.
OTDR tab
Set the marker type (Marker, Line).
Marker:
Line:
Ghost cursor display on/off
Checks secondary reflections
Set the calculation method for
total loss (Cumulate loss, Loss
between S and E).
Cumulate: Integrated value of
events
Between two points: Loss
between S and E
Configure the work completion notification.
Configure settings that indicate that the optical
fiber cable being installed has reached the
destination with an alarm or the like.
Turns approximated line
display on or off
Displays an approximated
line for waveform events.
Select the measurement
distance unit
This menu is not available on
-HJ suffix code.
Calculation method for total
return loss (Include END,
Exclude END).
Set the zoom method.
Select the zoom behavior of the waveform
display that is controlled with the arrow keys.
Locks screen operations
Screen operations can be locked after
a given time elapses.
1 2
3
Select the cumulate loss type
(Type1, Type2, Type3)
Select the calculation method for
cumulate loss.
END point loss display
(ON, OFF)
Select the reflection term
(Return Loss, Reflection
level)
This menu is available on -HJ
suffix code.
Marker information display
(OFF, ON)
Display the loss and the
distance from the measurement
reference point to each marker
on the waveform display area.
Setup
