YOKOGAWA AF220, Application Note

Page: 6 / 22

F²MC-16LX Family, Flash Programmer Yokogawa AF220/221
www.cypress.com
Document No. 002-05108 Rev. *B 6
Table 1. Signal assignment of interface cable
AF220 -
Signal Name
AZ210 / AZ212
Pin No.
AZ211
Cypress-Name
Pin No. color
TRXD 27 1 brown SOTx
*1
TTXD 13 2 red SINx
*1
TCK 6 12 white & red SCKx
*1
TAUX 23 9 white P00
*2
- - - - P01
*2
TMODE 12 4 yellow MD0
TAUX4 20 11 white & brown MD1
TAUX3 19 13 white & orange MD2
/TRES 5 14 white / yellow /RST
/TICS 10 8 grey optional
*3
TVCC 2 20 light blue Vcc
VCC 3 18 white & grey Vcc
GND 1,7,8, 14, 15, 21, 22, 28 soldered on PCB (black) GND
*1
: The used serial interface depends on the microcontroller series.
*2
: Instead of P00, P01 other port-pins may be used (See to Application-Note AN-MCU-390031-E-xx)
*
3
: The programmer signals (SINx, SOTx, SCKx, P00, P01, \RST) may conflict with the user-system while
programming. The signal /TICS can be used to disconnect the user circuit but additional three-state drivers have to
be used. Refer
to the chapter “Examples of serial programming connection” of the MCU hardware manual
.