IM 751534-E2-01E (4/5)
French
AVERTISSEMENT
Pour éviter les électrocutions et les incendies, veillez à fixer les autocollants de
protection de sorte que les orifices de montage soient complètement recouverts.
ATTENTION
Soulevez les instruments de mesure connectés avec tous les supports de montage
en rack fixés.
Sinon, les supports de montage en rack peuvent se déformer ou les instruments de
mesure peuvent tomber.
1.
Affix cover stickers (1) over the eight mounting holes of the two measuring
instruments.
2.
On the left side of the left measuring instrument, attach the rack frame (2) with
two M4×14 mm countersunk head screws (3).
On the right side of the left measuring instrument, attach the center bracket that
has a protrusion at part A (4) with two M4×14 mm countersunk head screws (3).
Tightening torque reference: 1.2 N·m to 1.3 N·m
3.
On the right side of the right measuring instrument, attach the rack frame (2) with
two M4×14 mm countersunk head screws (3).
On the left side of the right measuring instrument, attach the center bracket that
has a rectangular hole at part A (5) with two M4×14 mm countersunk head screws
(3).
Tightening torque reference: 1.2 N·m to 1.3 N·m
4.
Connect the two measuring instrument by fitting part A of the center brackets (4
and 5), and attach them with a M4 x 6 mm bind machine screw (6). Place the bent
part B of the center bracket (5) against part B of the center bracket (4) and slide it
horizontally to connect the brackets.
Tightening torque reference: 1.2 N·m to 1.3 N·m
5.
Attach the rear bracket (7) to the rear of the right measuring instrument with a M3
x 14 mm binding screw (8). Attach the bent part C of the rear bracket (7) so that it
covers the C part of the left measuring instrument.
Tightening torque reference: 0.6 N·m to 0.7 N·m
