IM 751534-E2-01E (2/5)
4. Removing Parts for Rack Mounting (for each unit)
When each feet are separate
• Removing the handle
1.
With the handle slightly behind the top, grab the base of the rotating part and
widen it in the direction of the arrow to remove it.
2.
Remove the two mounting screws (a) from the front handle base (b).
• Removing the feet from the bottom
1.
If black pins (i) are fitted to the feet (c), pry out the black pins (i) using a thin flat-
blade screwdriver as shown in the figure (four locations).
2.
Apply force in the direction of arrow B (towards the measuring instrument) to slide
the feet (c) (four locations).
3.
Apply force in the direction of arrow C (downward) to remove the feet (c) (four
locations).
• Removing the cover stickers
Remove the two cover stickers (d).
• Removing the rear frame mounting screw
When two measuring instruments to be connected are placed side by side, the
measuring instrument on the right (left) looking from the front will be referred to
as the right (left) measuring instrument. On the right measurement instrument,
remove the rear frame mounting screw (e) on the right side looking from the rear.
Do not remove the rear frame mounting screw from the left measuring instrument.
d
a
a
b
b
i
Pry out the black pin from each
foot (c).
d
c
c
B
C
c
B
C
e
