32
Number of saved data
Number of saved data is 3-digit numbers. When LOGGING-mode,
“ L ” is attached to the top of 3-digit numbers. The instrument
allocates the smallest number, between 000 to 999, that has not yet
been used. Use the
(RANGE) key or
(REL
/%) key switches
the number of saved data.
To save a Data (SAVE-mode)
1) Press the MEMORY key. (The display shows the “ MEM ”symbol.)
2) Press the SAVE (HOLD) key.
(The display shows the number of saved data.)
3) Press the SAVE (HOLD) key to save the data.
Another press of the SAVE (HOLD) key saves a data for the second time
measurement or later.
4) To cancel the function, hold down the MEMORY key for one second.
(“ MEM ” symbol disappears.)
To save a Data (LOGGING-mode)
1) Press the MEMORY key. (The display shows the “ MEM ”symbol.)
2) Press the LOG (MIN/MAX) key.
(The display shows the logging interval (period).)
Set the value with the
(RANGE) key or
(REL
/
%) key.
The default setting is one second.
The display shows “ FULL ” when the logging data is already saved.
When saving the new data, perform delete of data.
3) Press the LOG (MIN/MAX) key to start logging. (The “ MEM ”symbol is
flashing.)
4) To cancel the function, hold down the MEMORY key for one second.
When memory capacity becomes full, the function is automatically
canceled.
(“ MEM ” symbol disappears.)
Summary of Contents for 734 01
Page 2: ......