vi
IM 704420-01E
How to Use This Manual
Structure of the Manual
The User’s Manual consists of the following sections:
Chapter 1 Explanation of Functions
Describes the functions of the instrument. Operating procedures are not given in this chapter.
However, reading this chapter will help you understand the operating procedures given in the
chapters that follow.
Chapter 2 Names and Uses of Parts
Describes the names and uses of each part of the instrument.
Chapter 3 Measurement Preparation and Common Operations
Describes preparations that are taken before making measurements such as handling
precautions, how to install the instrument, how to connect to the power supply, how to turn
ON/OFF the power switch, and how to connect the probe, and the procedure for entering
numeric values.
Chapter 4 Setting Measurement Conditions
Describes how to set the measurement conditions such as the measurement function,
equalizer ON/OFF setting, trigger mode, slice level, gate, arming, inhibit, and clock signal.
Chapter 5 Displaying the Measured Results
Describes how to operate the meter inidication and numeric display.
Chapter 6 Storing and Recalling Setup Information
Describes how to store and recall setup information from the internal memory.
Chapter 7 Outputting Signals, Initializing Setup Information, and Setting Key Lock
Describes how to output signals, initialize setup information, and set key lock.
Chapter 8 Communication Function
Describes the communication functions of the GP-IB interface.
Chapter 9 Troubleshooting and Maintenance
Describes the possible causes of problems and their appropriate corrective measures.
Describes the error codes and their appropriate corrective measures. Describes zero position
adjustment of the needle, self-tests, calibration, performance tests, circuit breakers, and other
information.
Chapter 10 Specifications
Describes the main specifications of the instrument.
Index
Index of contents.
