1
User Instruction Manual N-610LY, N-630LY Rope Grab Version
This manual is intended to meet the Manufacturer’s Instructions as required by CSA Z259.2.5.and
ANSI Z359.15 and should be used as part of the employee training program.
DESCRIPTION:
Key components of the Yoke N610LY, N630LY Rope Grab Models are depicted in the drawing below. These Rope Grab Models
are designed for connection to APPROVED 5/8” rope only . The N610LY, N630LY are trailing rope grabs – they are designed to
automatically ‘follow’ the user along the rope and may be purposefully detached by the user anywhere on the lifeline.
Figure 1– 16mm(5/8”) Rope Grab
N-610LY,
N-630LY,
Rope Grab
INSTRUCTIONS
AND
WARNING
INFORMATION
A Lanyard Connection Handle
B
Gravity Lock
C
Enclosure
D Roller Cam
E
Locking Roller
F
Detent Pin
G Warning Marking
H Energy Absorber
WARNING:
This product is part of a personal fall arrest or restraint system. The user must read and follow the manufacturer’s instructions for
each component or part of the complete system. These instructions must be provided to the user of this equipment. The user must read and
understand these instructions or have them explained to them before using this equipment. Manufacturer’s instructions must be followed for
proper use and maintenance of this product. Alterations or misuse of this product or failure to follow instructions may result in serious injury
or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application, contact Yoke Industrial.
IMPORTANT:
Before using this equipment, be sure to log relevant information in the Inspection and Maintenance Log at the back of this manual.
