1. A QR code will appear on
your phone or tablet.
2. Place the Ohma on a hard
surface and don’t move it.
3. Hold the QR code in front
of the Ohma camera at a
distance of 12 to 18 inches.
The code may take up to
20 seconds to scan.
4. If the light is pulsing on
Ohma, it is scanning the
QR code. You will hear an
audio prompt from the
device and the light will
flash green once Ohma
has been connected to
your app.
• Make sure you are in a well-lit
space and your screen is at
maximum brightness and
does not auto-dim.
• Hold the QR code steady in
front of the Ohma camera
while it is being scanned.
• Avoid having a glare on the
screen of your device.
• If the light is not pulsing,
unplug Ohma and plug it
in again, wait for the light
to pulse, and scan the code
again. Or, hold the Power
button down for 20 seconds
to perform a factory reset
and restart the connection
process.
• If your Wi-Fi name and
password have not been
changed and are the same
as what’s on the back of
your router, change your
Wi-Fi network name and
password to something
that is easy to type to avoid
entering your information
incorrectly.
1. Make sure your phone or
tablet is connected to your
2.4Ghz Wi-Fi network.
2. Grant app security
permissions if prompted
by device.
3. In the app, press
“Add a Device”
4. Name your Ohma
5. If your phone or tablet is
connected to Wi-Fi, the
network name will auto-
populate. If it does not
auto-populate, enter your
Wi-Fi name. Enter your
password. Both Wi-Fi
name and password are
case sensitive.
• Ohma can only connect to
a 2.4Ghz network.
• Your router needs to be a
minimum of 802.11g. For
maximum performance,
802.11n router with WPA2
is preferred.
• Ohma cannot connect
to Wi-Fi networks with
additional authentication
such as a hotel or business
network.