Lenovo Yoga Tablet 2 Hardware Maintenance Manual
19
Removing the 1030 vibrator motor
Follow the steps below to remove this FRU.
1.
To disconnect the power supply to the tablet, use a pair of tweezers to detach the battery
FPC from its connector on the main board.
Figure 3-1. Disconnecting the power supply of the tablet
2.
Desolder the wires of the vibrator from the sub board at the position shown in the next
figure.
Figure 3-2. Position for desloldering the wires of the vibrator motor.
Prepare for this step by:
Removing the following FRU:
o
1010 rear cover on page 13.
