ENGLISH
１６
REMOTE CONTROL
The remote control requires one CR2032 - 3V battery (supplied).
1. Pull out the cover from the back side of remote control.
2. Follow the +/- polarity indicated on the remote control and insert the battery into the remote
control.
3. Place the cover back into the remote control.
The remote control must be pointed towards the remote sensor on the control panel.
If the remote control doesn’t operate as expected, replace the battery.
CLEANING AND MAINTENANCE
CAUTION
: Wash the filter net at least once a month to ensure free air flow.
1. Always unplug the appliance and keep it away from any socket before cleaning. Make sure the heater
has become completely cool.
2. Remove the filter net and soak it in warm water with mild detergent for some minutes, then rinse and
dry it well. Install the filter net back in place.
3. To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly with a soft,
dry cloth before using again.
4. Do not use any cleaning or chemical products of any kind. Do not let water enter the openings on the
heater. Do not use wax or products that create a shine as they can react to heat and cause
discoloration.
5. When the appliance is not being used for prolonged periods, ensure that it is fully unplugged from the
socket and store in its packaging for simple storage and later use.
