ENGLISH
１４
BEFORE FIRST USE
1. Take the product out of the packing and take off the poly-bag.
2. Set the machine up on a flat, stable, heat-resistant surface.
OPERATING INSTRUCTIONS
Connect the power plug with power outlet, when you hear a signal alarm it means that heater has
connected to the power. Power indicator lamps will light up and the product enters into stand-by mode.
Press the button
to turn on the unit.
a)
Temperature setting
:
Press
button two times, the temperature indicator will light up on the display.
You can change the temperature by pressing
or
button. The range of the temperature is
from 16-32
0
C. The temperature that you have set will be effect at once.
CAUTION
: The device will not measure the temperature within 10s when power on the device. After the
device works for 10s, if the ambient temperature is higher than the temperature that has been set, the
heater will go into standby mode. If the ambient temperature decreased under that has been set, the
heating function will be on again.
b)
Power setting
:
Press
button to choose the desired heating power:
Low heating power
High heating power
ECO
ECO mode - auto heating power
Ventilation - in this operating mode only the fan operates with no heating
Anti-freeze function - the appliance keeps the room at a temperature above
7°C
NOTE
: In ECO function the appliance will automatically set the power level to guarantee the best comfort
reducing the energy consumption. In this operating mode the unit may switch the heating power level
