Yoer EB01 BERO, Manual

Page: 12 / 16

ENGLISH
12
DISPLAY
TECHNICAL SPECIFICATION
Power 160W
Voltage / Frequency 220-240V~ 50-60Hz
Dimensions 180cm x 160cm
USING THE DEVICE
1. Carefully check the blanket, controller and the cords for damage. If the device is pierced
and/or torn, do not use it.
2. Make sure the controller plug is fully inserted in its socket by pushing it in, until you feel resistance.
The grooves on the plug should be facing upwards while connecting the plug.
3. Plug in the device.
4. Turn the device on by pressing the button on the controller.
5. Set the desired heating intensity level in the range of 1-10
using the “+” and “-“ buttons. When
“SET” disappears, the new setting is activated.
6. Set operation time in the 1-10 hour range by first pressing the timer button (the hour counter
should start blinking) and selecting the desired time using the “+” and “-“ buttons. The device will
shut off automatically after the selected number of hours has elapsed
. When “SET” disappears,
the new setting is activated.
7. Cover yourself with the blanket while being careful not to sit or lean back on creases.
8. When you are finished, turn off the device (if the timer hasn
’t shut off the device yet) and unplug
it. Allow the blanket to completely cool down before folding and storing.
NOTE: if the blanket operates for a long time, the automatic overheat protection system may be triggered
and shut off the device. If this occurs, unplug the blanket and allow it to cool down for 60 minutes before
using it again.
Setting change
indicator
Heating intensity level
indicator (1-10)
Remaining time until
shutoff indicator