Yoda VP306, Quick Installation Manual

Page: 8 / 60

8
SIP Account Number Selections
With 3 SIP account registered numbers, the VP306 may receive all the incoming calls from the 3
SIP servers. Realm 1, 2, and 3 are used to configure the registered numbers for the 1st, 2nd,
and 3rd SIP servers, respectively. VP306 may register different phone numbers to different SIP
servers. You may press function key LINE-2 to select for the 2nd SIP server, and the LCD will
display the <phone number> for the SIP server registration. You may also press 2_*_Speaker
to select for the 2nd SIP server. In the same way, you may press LINE-3 (or 3_*_Speaker ) to
select for the 3rd SIP server. The LINE-1 is used at default. Make sure all the Realm 1, 2 and 3
are all registered and the LED indicator REG will be ON .
9. The LCD will display the registered <phone number> after successful SIP registration to the 1st SIP
server at default.
Step 5: Making Point-To-Point SIP Calls
1. Select one of the three SIP servers. Pick up the phone, and you should hear a dial tone.
2. Press 123456# to call the party with the number 123456 registered in the SIP server. Note # is
used to send out the call immediately. In a moment, you should hear the ring back tone, and wait for
the called party to answer.
3. For more applications, please refer to the user manual for VoIP Applications Examples.
Note: 1) if you have difficulties in configuring VP306, please refer to the last chapter for trouble
shootings.
2) VP306P is the same as VP306 with additional Power over Ethernet feature. With power
supply over Ethernet cable from central Ethernet Switch, VP306 may work without
external power adapter.