Duplex Mode........: -
-
Flow control.......: Disabled
Disabled
Clock source.......: DTE
DTE
RMII ref clock out.: -
-
Interface BW (kb/s): Unlimited
Unlimited
MAC address........: CD CD CD CD CD CD
CD CD CD CD CD CD
MAC Loopback.......: Enabled
Disabled
PHY configured.....: YES
YES
PHY number.........: 0
0
Advertisement......: 10H 10F 100H 100F
10H 10F 100H 100F
3. Be sure that the LIU configuration parameters are compatible with the E1 signal
source (line code, line build out, etc.).
The following CLI command displays the bitstream interface configuration:
\Config\Interfaces\Interface_B>
gc
Current config
Next start up config
Working mode.......: BitStream
BitStream
Frame Size (bytes).: 96
96
Underrun value.....: 0xFE
0xFE
Clock source.......: Loopback-master
Loopback-master
Tx clock polarity..: Falling
Falling
Rx clock polarity..: Rising
Rising
Interface loopback.: Disabled
Disabled
LIU line format....: E1
E1
LIU type...........: DL_2155
DL_2155
LIU line code......: HDB3
HDB3
LIU line build out.: E1_75
E1_75
LIU rx term........: 100ohm
100ohm
LIU monitor gain...: Norm
Norm
LIU Rx Equalizer Gain Limit: -12db
-12db
LIU Jitter Attenuation.....: Disabled
Disabled
LIU loopback...............: Disabled
Disabled
3
