RECHARGEABLE BACTERIA AND
BIOFILM DETECTION LAMP
With Bactiscan’s™ unique wave alternating UV
system, Bactiscan™ enables food processors
to immediately isolate Biofilms, mould and
bacteria such as salmonella and E.coli and
many other contaminants are easily located
and identified with Bactiscan™ which makes
the remediation job much faster and therefore
more cost effective.
These contaminants are often undetectable
using other methods such as white light and
UV lamps. With Bactiscan™ you can light up
the entire surface and get an immediate result,
so within seconds you can pick things up that
would take hours with any other method.
Runtime
Product
Bactiscan
TM
Power On
1h 30mins
Charge Time
6hrs 30mins
IP Rating
IP67
Battery
7.4V 6.6Ah Li-ion
Impact Resistance
1.5 Metres
Charge Base
Yes
Vehicle Charger
Yes
Dimensions
250 x 125 x 120 (mm)
Weight
1.0KG
CHARGING
1. Slide the Bactiscan™ inside
the charging base, push
until it slots in the back
and connects with the
charging ports.
2. Connect the charger lead
into the input socket at the
back of the charging base.
3. Plug the charger into a
suitable socket outlet. Turn
switch on. The indicator on
the charger will illuminate
red when charging and
green when fully charged.
4. To release the Bactiscan™
from the charging base,
hold and pull the release
levers towards you, use
your thumb to push the
Bactiscan away from the
charging slot as shown in
picture.
5. Once the Bactiscan™ is
released slide the lamp
out of the charging base.
The Bactiscan™ unit is
ready to be used.
Normal View
Item looks clean and
normal under white
light or standard UV
HANDHELD BACTERIA
AND BIOFILM
DETECTION SYSTEM
Environmentally friendly wave altering UV to quickly
identify areas harbouring bacterial contaminants
such as E.coli, listeria and salmonella which are
often missed under standard white light or UV lamp.
Bactiscan™ View
Clearly reveals
contamination
Specification
OPERATING THE
BACTISCAN
TM
Bactiscan™ illuminates a surface via 4 separate
UV lights. These lights are UV-A type and are
safe for short use. It is always recommended
that the user wear eye protection (not
supplied) when operating Bactiscan™. To
switch ON, simply hold the grey button and
the Bactiscan™ will turn on. To turn the lamp
OFF, release the grey button.
Bactiscan™ uses smart battery technology.
When the battery is fully charged the battery
will fall into sleep mode and will maintain a
full charge via trickle charge. It is safe to leave
Bactiscan™ plugged in whilst in its cradle.
Please note: The battery will reach optimum
performance after 5 complete discharge/
charge cycles.
