INST
ALLER'S
INSTRUCTION
P20 OF 38
INSTALL PV-MODULE
0.24-0.3 inch. Take
Assembly method
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !
INST
ALLER'S
INSTRUCTION
P19 OF 38
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !
INSTALL PV-MODULE
ASSEMBLY OF PV-WIRE
Installation sketch
1) The PV-wire should be single-pole, double
insulated solar cable, the length of which is due to
the distance from PV-modules to outdoor unit of
AC, the recommended conductor cross section is
AWG 12, and it should accord with UL4703
2) The MC-4 connectors should be assembled to the
PV-wires, and the other side of the PV-wires
should be assembled with spade terminals.
ASSEMBLY OF MC-4 CONNECTOR
Introduction of MC-4 connector
The MC-4 connector contains three parts, male PV
cable coupler (PV-KST4/6II-UR), female PV cable
coupler (PV-KBT4/6II-UR) and a safty lock clip
(PV-SSH4).
Male PV cable coupler
(PV-KST4/6II-UR)
Female PV cable coupler
(PV-KBT4/6II-UR)
Safty lock clip (PV-SSH4)
MC-4 connectors,
onnected with
PV-modules
PV-wires
spade terminals,
connected
with outdoor unit
Outdoor unit
PV-wire
Maximum number of PV-modules in one system: 5
PV-Module
PV-Module
PV-Module
MC-4 Connector
MC-4 Connector
MC-4 Connector
L1
L2
S
+
+
+
+
+
+