6
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [email protected] • ymgigroup.com • 866-833-3138
MIN
I SPL
ITS
•
VRF
•
PTAC
•
SOLAR
•
LED
LIG
HT
IN
G
YMGI
Your Modern Green Idea
TIMER ON / TIMER OFF button
TIMER ON button
• “TIMER ON” button can set the time for timer on. After pressing Timer On button, the “
“ icon disappears
and the word “ON” on remote controller blinks. Press “ “ or “ “ button to adjust TIMER ON setting. After
each pressing “ “ or “ “ button, TIMER ON setting will increase or decrease 1min. Hold “ “ or
“ “ button, 2s later, the time will change quickly until reaching your required time. Press “TIMER ON” to
confirm it. The word “ON” will stop blinking. The “
“ icon resumes displaying.
• Cancel TIMER ON: Under the condition that TIMER ON is started up, press “TIMER ON” button to cancel.
TIMER OFF button
• “TIMER OFF” button can set the time for timer off. After pressing the Timer Off button, the “
“ icon
disappears and the word “OFF” on remote controller blinks. Press “ “ or “ “ button to adjust TIMER OFF
setting. After each pressing “ “ or “ “ button, TIMER OFF setting will increase or decrease 1 min. Hold
“ “ or “ “ button, 2s later, the time will change quickly until reaching your required time. Press “TIMER
OFF” word “OFF” will stop blinking. The “
“ icon resumes displaying.
• Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press “TIMER OFF” button to
cancel it.
Notes:
• Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
• Before setting TIMER ON or TIMER OFF, please adjust the clock time.
• After starting up TIMER ON or TIMER OFF, set the constant circulating valid. After that, air conditioner will
be turned on or turned off according to setting time. The ON/OFF button has no effect on setting. If you
don’t need this function, please use remote controller to cancel it.
Function introduction for Combination Buttons
Energy-saving function
Under cooling mode, press “TEMP” and “CLOCK” buttons simultaneously to start up or turn off energy-
saving function. When energy-saving function is started up, “SE” will be displayed on the remote controller,
and air conditioner will adjust the set temperature automatically according to factory settings to reach to the
best energy-saving effect. Press “TEMP” and “CLOCK” buttons simultaneously again to exit energy-saving
function.
Notes:
• Under energy-saving function, fan speed is defaulted to auto speed and it cannot be adjusted.
• Under energy-saving function, set temperature cannot be adjusted. Press “TURBO” button and the remote
controller won’t send signal.
• Sleep function and energy-saving function cannot operate at the same time. If energy-saving function has
been set under cooling mode, press sleep button will cancel energy-saving function. If sleep function has
been set under cooling mode, start up the energy-saving function will cancel sleep function.
8 °C Heating Function
Under heating mode, press “TEMP” and “CLOCK” buttons simultaneously to start up or turn off 8°C heating
function. When this function is started up, “
“ and “8°C” will be shown on remote controller, and the air
conditioner keep the heating status at 8°C.Press “TEMP” and “CLOCK” buttons simultaneously again to exit
8°C heating function.
