2
1
2
1
THE COMMENTARY OF HOLES
A:The Solid Door
B:The Hollow Door
Lock
The hole of screws
The hole of screws
Armature
Installation drawing
C:Use The Extended Plate
THE COMMENTARY OF INSTALLATION
Step1:Confirm the position of installation
It can be installed upon the door or the side of the door
Step2:Paste the sticker
Note:Adjust the sticker to assur the proper alignment
e
Step3:Drill the hole
Drill the hole according to the sticker,and drill the hole
for the LED on the door frame.
Step4:Wiring
Install the led on the door frame, and connect the 9pin
Step5:Fix the magnetic lock and armature
Connect all the wire to the shear lock body, then adjust
the delay time, then fix the magnetic lock and armature
Step6:Electrify
and adjust
Check whether operation is proper or not when
electricfying,please adjust the armature slightly
when they can't absorb
Door frame
Door leaf drill
the hole for LED
Install the LED
Adjust up or down
Adjust left or right
The hole of screws
The hole of screws
Lock
Armature
Installation drawing
Door frame
Door frame
