8
Step .
Step .
4 Place the diagonal belt in the
diagonal belt guide at the back of the seat.
Turn the handle of the seat to the
appropriate place in the car. (Hearing
“click”) Be sure the handle has been
locked and it should be firmly against the
backrest of car’s seat.
5 Tighten the vehicle`s own 3-point
seatbelt by pulling hard on the positions
showed in fig. 5
Attention: The handle of the seat must be firmly against the
backrest of car seat.
You can release the child if you act the above steps in
reversal ways.
Make sure all the belts` position is right and they has not
become twisted. Also check that the cover is not impeding the
movement or fit of the belt webbing in any way.
The satisfactory position of the adult safety-belt buckle
relative to the child car seat is as the Fig 6. Fig.7 is incorrect.
You can contact the child car seat manufacturer if in doubt
about this point.
.
Fig.4
Fig.6
Fig.7
Fig.5