7
Fig.1
Fig.2
Fig.3
Click
Fig
3: Handle clicked back to initiate the rocking feature.
Fig
4: Handle clicked down for a more upright sitting position,
easy to feeding.
.
.
Always ensure that the baby was fitted in the seat firmly by
the harness, and the handle is locked in position.
5. Securing the infant carrier
Step 1.
Step 2.
Step 3.
Please read the operating handbook in your vehicle to
inform yourself about the basics concerning children’s seats
in vehicles
DO NOT place this baby seat on seats with front airbags.
This baby car seat can only be installed using a three-point
vehicle belt.
The baby car seat must be Installed rearwards facing(in the
direction opposite the one in which you are traveling)
Adjust the handle to the forward
position (Fig. 1).
Put the seat in car's seat (Fig. 2). Put
the baby car seat against the backrest
of the vehicle seat.
Slide the lap belt of the vehicle’s 3-
point seatbelt through both Lap belt
guides. Let the tongue plate snap in the
belt lock with a clearly audible “click”.
Pull the shoulder belt in narrow
direction to tighten the lap belt
Check to make sure the tongue plate is
locked by pulling on the belt(Fig. 3).
.
.