ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
7
8
Regarding the installation and adjustment of the door hinge:
1
2.Use the screw at the back end of the hinge to adjust the front and back position of the door panel
(ensure that the front of the door panel is in the same plane as the upper and lower panels).
3.Use the screw at the front end of the hinge to adjust the left and right position of the door panel
(ensure that the left and right sides of the door panel are in the same plane as the upper and lower panels).
4.After completing these three steps
,
secure the other two screws on the hinge.
Align the screws with the center of the
mounting hole of the guide rail.
Note: Installing the slide will block the hole of part B (eccentric wheel)
,
so it is recommended to first install part B (eccentric wheel) into its
corresponding hole before installing the slide. This will facilitate step 9.
1.Use the "waist round hole" marked with a triangle to adjust the position of the door panel (ensure
that the gap between the door panel and the upper and lower panels is consistent).
3
1
2
4
1
2
1pc
1pc
3
1pc
7
4
1pc
8
1pc
11
1pc
12
2pcs
B
19pcs
C
12pcs
D
6pcs
P1
1pc
13
3pcs
18
3pcs
19
C
C
C
C
D
D
B
C
C
C
C
C
C
C
C
C
C
C
C
11
19
18
12
13
7
8
4
3
X3
X3
P1
P1
P1
P1
P1
P1
P1
