YG125-23 Maintenance Manual
Starting system
132
15
、
Starting system
Overview
When the engine starts to work, an exogenous action is needed to help it run, thus entering the ignition & fuel supply
procedure to enable the internal combustion engine to combust repeatedly and work steadily. YG125-23 motorcycle is
only equipped with electric controlled starting. First, release it from the protection of shift position switch, side stand switch
and clutch switch; then press down the start button to power on the relay, start the engine to drive the idle gear and starter
gear, thus enabling the engine to enter its operating cycle for normal ignition, fuel injection and combustion. The system
consists of the following components:
•
Starting motor;
•
Starting relay;
•
Accumulator;
•
Start switch and flameout switch;
•
Neutral position switch and clutch switch.
Circuit schematic drawing
Overview
Major parts and components
Circuit schematic drawing
Major faults diagnosis
Maintenance ofstarting system
Summary of Contents for YG125-23
