Yingang YG125-23, Maintenance Manual

Page: 100 / 149

YG125-23 Maintenance ManualFrame and exhaust system
108
Headlamp dimming
Before driving, check the brightness, direction, etc. of the
headlamp.
The adjustment can be made to the headlamp in the left /
right and vertical directions.

Loosen bolts and screws.

Move the headlights back and forth, Adjust the
lighting height to the desired location.

Lock bolts and screws.
Headlight bulb 13.5V16.2/5.8W(LED), Do not remove
the replacement bulb.
Position lampbulb
Replace the steering signal light.

Loosen the nut,Remove turn the connecting wire
，
Remove the signal lights.

Replace the new signal light
（
LED
）
, Do not remove
the replacement bulb.

The order in which the signal light are installed is
reversed.
Front and rear lamp bulb12V1.5W(LED)
Taillight
、
Taillight bulb

Loosen the screws, Remove the rear lights.

Replace the new taillights
（
LED
）
, Do not remove the
replacement bulb.

The order in which the tail lights are installed is
reversed.
Taillight bulb
：
13.5V 1.2/2W(LED)
Removal / installation of exha ust muffler
To remove the exhaust muffler:

Park the motorcycle on the plane ground with main
stand; pull off the oxygen sensor patch plug.
Adjusting
bolt
Adjusting
bolt
BULB
Bulb
Taillight lampshade
nut