YILMAZ SKN 301, User Manual

Page: 63 / 104

63
CALIBRATION OF CONVEYOR CUTTING DIMENSION

Loosen the allen nuts on top of the conveyor support, move the support in far position, and then fix the nuts.

Send conveyor support to any position (For example 500mm)

Align the part to be processed with conveyor support, and cut with the tool at front.

In case profile is longer than 500 mm (For example 2 mm longer)

Open main screen.

Press on button on the pop-up screen

Press on operator button in on the pop-up screen

Enter password (1234).

Increase the offset value about 2 mm in appeared screen . In other words
if offset is 100 mm, then edit offset value as 102 mm.

In the case that the profile is shorter than 500 mm (For example 2 mm shorter) decrease the offset value about 2 mm in
appeared screen . In other words if offset is 100 mm, then edit offset value
as 98 mm.

Move the machine to reference position by pressing on . Thus calibration settings are
completed.

If machine works in inch, same calibration procedure applies.