Y
ı
lmaz PVC ve Alm.
İş
leme Makineleri Ltd.
Ş
td
MK 420
42
8. MAINTENANCE AND CLEANING
8.1. STARTING TO WORK
8.1.1 Ensure that the working table and all parts are clean and dry. Degrease the table.
8.1.2 Remove all kinds of burr, chip and foreign materials form the machine surface.
8.2 MAINTENANCE AT THE END OF THE WORKING DAY
8.2.1 Disconnect the power supply.
8.2.2 Remove all kinds of burr, chip and foreign materials form the machine surface.
8.2.3 Clean the table and dry it with a piece of cloth (don’t use any materials which could cause damage to the
machine’s paint).
Disconnect the power supply before carrying out all these works.
9. TROUBLESHOOTING GUIDE
Here are some recommendations for solving urgent problems. If the trouble cannot be solved, or if you have a
problem other than those described hereunder, please contact our technical service or your nearest dealer.
PROBLEM
SOLUTION
1. Machine does not work.
1. Control electric power supply. Verify correct connection of
cables.
2. Saw is rotating reversely.
1. Control the electrical connection.
3. Quality of Cutting is bad
1. Change the saw. Cutting blade might be worn.
