YILMAZ ACK 420, Manual

Page: 33 / 61

33
2.3.4 Use correct illumination for the safety of the operator. ( ISO 8995-89 Standard The lighting of indoor work
system)
2.3.5
Don’t use any materials other than those recommended by the manufacturer for cutting operations on the
machine.
2.3.6 Ensure that the work piece is clamped appropriately by the machine's clamp or vice
2.3.7 Ensure safe working position, always keep your balance.
2.3.8 Keep your machine always clean for safe operation. Follow the instructions at maintenance and replacement of
accessories. Check the plug and cable regularly. If damaged, let it replace by a qualified electrician. Keep
handles and grips free of any oil and grease.
2.3.9 Unplug first, before conducting and maintenance works.
2.3.10 Ensure that any keys or adjustment tools have been removed before operating the machine..
2.3.11 If you are required to operate the machine outside, use only appropriate extension cables.
2.3.12 Repairs should be carried out by qualified technicians only. Otherwise, accidents may occur.
2.3.13 Before starting a new operation, check the appropriate function of protective devices and tools, ensure that they
work properly. All conditions have to be fulfilled in order to ensure proper operation of your machine. Damaged
protective parts and equipment have to be replaced or repaired properly (by the manufacturer or dealer).
2.3.14
Don’t use machines with improper functioning buttons and switches
2.3.15
Don’t keep flammable, combustive liquids and materials next to the machine and electric connections.