YILMAZ 300, User Manual

Page: 61 / 101

61
USING CONVEYOR SUPPORT AT CLOSE AND FAR POSITIONS
a. Close Position

In order to cut parts in short dimensions, conveyor support should be used in close position.

Loosen the allen nuts on top of the conveyor support, move the support in close position, and then fix the nuts.

By pressing the button, open the screen in which support position is selected.

Press on “İleride” button in displayed screen. Position information is automatically updated.
b. Far Position

In order to cut parts in long dimensions, conveyor support should be used in far position.

Loosen the allen nuts on top of the conveyor support, move the support in far position, and then fix the nuts.

By pressing the button, open the screen in which support position is selected.

Press on “İleride” button in displayed screen. Position information is automatically updated.
CALIBRATION OF CONVEYOR

By pressing on button, the screen, in which calibration settings are made, is displayed.

Enter the required password (12345678) in password area and click on
button.

Close and far position of conveyor support should be calibrated separately.