28
6.10- Assembling Gear Unit with Tightening Arm
The advised mounting positions are shown below. According to the nature of load and
direction of rotation refer to one of the drawings below. It is advised that the motor
position is in a range of +/- 15 degree as shown.
For uniform and moderate loads (fs<=1,6) ;
If direction of output shaft is cw ;
If direction of output shaft rotation is ccw ;
Operating Instructions
T Series
YILMAZ REDÜKTÖR
Installing
Summary of Contents for T Series
Page 4: ...4 Operating Instructions T Series YILMAZ REDÜKTÖR ...
Page 42: ...Appendix ...
