Installation of Relay for Immobilizer function:
To apply the Engine Enable/ Disable Relay, connect the following
cables from the relay socket:
Plug the Relay into the Relay Socket to connect.
Wiring Diagram (see next page)
¾
When laying the wiring loom
•
Try to ' bury' all wiring
•
Avoid abrasive corners and sharp edges
•
Avoid sharp folding and pinching the cables
Make sure that the connections have been made correct before you
connect the wiring harness to the Vehicle Unit.
11
PIN1 = 30: Connect to one end of
Ignition line (A)
PIN2: = 86: Connect to Vehicle
Unit, PIN9 (Purple/White)
PIN3: =87a: Connect to engine
end of ignition line (B)
PIN4: free
PIN5: = 85: Connect to +12V
Summary of Contents for SuperGuard
Page 13: ...12 ...