YHLO BIOTECH VISION ESR, Operation Manual

Page: 25 / 49

V3.0 OM- VISION Pro valid from 01
st
February 2020
15
Next: Goes to the next position.
Back : Back to the Cycle interface.
The description of patient information is the same as the "Cycle" ( Fig. 4-2-1-3).
4.2.3
Quality Control
Quality control testing will use 2 levels of quality control, a high level and a low
level.
Attention
Quality control can only be carried out in automatic detection mode!
After each maintenance or fault handling operation, the quality control test is
proposed to ensure the stability of the instrument performance.
4.2.3.1 Quality Control Test procedure
4.2.3.2 Quality Control parameter setting
Connect the instrument power cord. For the limited-activated instrument, turn on the
power on the back of the instrument .After the boot interface is finished, input the
user and password, click "Login". Then click "QC", login to the QC interface.
Start the
Instrument
Instrument Self-
Test
Set Quality
Control
Parameters
Scan sample and
enter control
number
Run Detection Sample Mix
Sample Scan Data Processing
View Quality
Control Results