24
Maintenance
YG Acoustics™ Rack has a high-quality finish on its various parts, which does not
require any routine maintenance. Use a soft cloth, slightly dampened with water only, to
remove any fingerprints or to wipe off dust, and immediately follow with a dry cloth.
Always make sure that water or any other material does not touch electronic equipment,
and that your entire system is unplugged.
Regularly inspect the tightness of Rack screws, but do not overtighten.
Always let your YG Acoustics™ dealer perform any tasks other than the above-
mentioned action. Attempting to perform any other repairs/modifications on your own (for
any reason) would immediately void the limited warranty.
Spikes
YG Acoustics™ Rack comes standard with spikes.
Caution: Rack with spikes installed is a heavy object with very sharp corners.
Please follow common-sense safety rules to prevent injury.
The holes for spikes on the bottom of each Rack bottom shelf allow for either 3 or 4
spikes to be used. For 3 spikes, use one spike in the front-center hole and two in the
back holes. For 4 spikes, use all corners and leave the front-center hole vacant.
To adjust a spike, adjust its height using a hex key in the side-hole of the spike-tip while
keeping enough thread in the spike to maintain stability, and re-tighten the locking nut.
Summary of Contents for RACK Series
Page 1: ...1...
