Yetter 2967-035A, Manual

Page: 9 / 16

ASSEMBLY INSTRUCTIONS
STEP 4
Choose the mounting hole in which to attach the R.M. wheels. Both wheels mounted in
the front holes
– wheels are interlocked. One wheel mounted in the front hole and one mounted in the
rear hole
– wheels are offset. Both wheels mounted in the rear holes – wheels are spaced apart.
Attach the R.M. wheel/hub assemblies to the 2967-
282 Combo Arm using 5/8” lock washers and hex
nuts. Adjust the bearing shield to top dead center, rotate slightly forward. Torque to 150 ft./lbs.
STEP 5
Align the residue manager wheels, conservation coulter (if used) to the planter opener
blades. The 2967-281 Mount Bracket has slotted holes in the faceplate to move the residue manager
wheels side to side; to be able to center the wheels on the seed furrow. Fully tighten mounting bolts.
Torque to 85 ft/lbs.