Yeti hopper, Owner'S Manual

Page: 4 / 12

4
TOUGH AS THEY COME:
THE STANDARD
DryHide™ Interior and Exterior
Our soft coolers use wildly stronger DryHide fabric for both
the interior and exterior shells. This specially calibrated material
is high tenacity 840 denier nylon with a double TPU lamination —
similar to material used in high-performance whitewater rafts.
It is waterproof and resistant to puncture and abrasion. The liner
is anti-microbial, mildew resistant, and FDA food-grade.
Plus, our RF-welded seams eliminate stitching, providing waterproof
construction and superior durability.
ColdCell™ Insulation
The deep and lasting chill of our soft coolers can be credited
to their premium ColdCell Insulation. The closed-cell foam is found
on both the sides and base of the cooler, off ering far superior
cold holding to ordinary soft coolers.
HydroLok™ Zipper
Go ahead: turn it upside down and give it a shake.
The HydroLok Zipper is the ultimate waterproof, airtight
closure. Constructed like zippers found in survival suits,
fi shing waders, and HazMat protective gear, you can trust
this zipper to perform.
We don’t make gear that will stand down when you’re faced with nature’s
extremes. We make gear to last. The Hopper™ series is outfi tted with the toughest
features around. These coolers are going to go the extra mile, and then some,
when it comes to keeping your contents colder, longer.
U-Dock™
The U-Dock is the terminal end of the HydroLok Zipper
that ensures a leakproof seal when closed. To maximize
ice retention and eliminate leakage, pull the slider until
it is fully engaged with the U-Dock.
D-Ring Tie-Down Points
The Hopper is equipped with reinforced D-Ring Tie-Down Points.
Use these to secure your cooler to your kayak, ATV, skiff , SUP, etc.