24
Assembly Cont.
assemblY
frame assemblY
Slide the seatstays over the steel pivot pin. Then
slide the 41.2mm female Yeti bolt and washer through the seatstays
and shock assembly. Place a male Yeti bolt with a washer on the opposing
side of the female bolt and thread into position. Cinch down both male
Yeti bolts with the 5mm allen keys. The last step is to install the derailleur
hanger and water bottle bolts.
Torque spec: 125-150 inch pounds
10
frame assemblY
Place the plastic washers on both sides of
the steel pin as shown. While holding the washers down slide the
seatstays over the washers.
9
