12.
13.
WEEKL
Y
MONTHL
Y
3 MONTHS
ANNUALL
Y
KEEP YOUR YETI FRESH
AND CLEAN
OVERVIEW
TORQUE
KEY TORQUE SPECS
Following these guidelines will help maintain the performance of your bicycle and prevent
more serious problems from arising. It is important to remember that service intervals can vary
depending on climate, trail conditions and riding frequency. If you are unsure about working
on your own bicycle, contact your authorized Yeti Dealer or visit the repair help section at
www.parktool.com for more information on general bicycle maintenance.
Yeti strongly recommends using a torque wrench when assembling your frame. Torque
specifications for individual parts on the SB5c are listed below, as well as in the step by step
assembly instructions later in the manual. For general bicycle maintenance please consult the
torque specifications of the manufacture’s component you are adjusting.
CLEAN AND LUBE CHAIN
CHECK TIRE PRESSURE
CLEAN BIKE OF MUD AND DEBRIS
CHECK BRAKE FUNCTION
CHECK SHOCK PRESSURE, IF APPLICABLE
CHECK FOR LOOSE BOLTS AND TIGHTEN, IF NECESSARY
CHECK HEADSET AND TIGHTEN / LOOSEN, IF NECESSARY
THOROUGHLY CLEAN PIVOT POINTS WITH A RAG (DO NOT LUBRICATE)
REPLACE BRAKE PADS, IF NECESSARY
CHECK TIRES FOR WEAR
CHECK SPOKE TENSION AND RETENTION, IF NECESSARY
CHECK CHAIN FOR WEAR AND REPLACE IF NECESSARY
COMPLETE TUNE-UP PERFORMED BY AN AUTHORIZED YETI DEALER
PART NUMBER
DESCRIPTION
TORQUE (NM)
300030151
BOLT TI MALE M6X1X12MM
6.5
300030057
INFINITY LINK BOLTS
14
300040454
COLLET BOLT M8
10
300040448
UPPER LINK COLLET AXLE
8
300040446
LOWER LINK AXLE
8
300040447
MAIN PIVOT COLLET AXLE
8
SCHEDULE
