12.
13.
WEEKL
Y
MONTHL
Y
3 MONTHS
ANNUALL
Y
KEEP YOUR YETI FRESH
AND CLEAN
OVERVIEW
TORQUE
KEY TORQUE SPECS
Following these guidelines will help maintain the performance of your bicycle and prevent
more serious problems from arising. It is important to remember that service intervals can vary
depending on climate, trail conditions and riding frequency. If you are unsure about working on
your own bicycle, contact your authorized Yeti Dealer or visit the repair help section at www.
parktool.com for more information on general bicycle maintenance.
Yeti recommends using a torque wrench when assembling your frame. Torque specifications
for individual parts on the ASR-C are listed below, as well as in the step by step assembly
instructions later in the manual. For general bicycle maintenance please consult the torque
specifications of the manufacture’s component you are adjusting.
CLEAN AND LUBE CHAIN
CHECK TIRE PRESSURE
CLEAN BIKE OF MUD AND DEBRIS
CHECK BRAKE FUNCTION
CHECK SHOCK PRESSURE, IF APPLICABLE
CHECK FOR LOOSE BOLTS AND TIGHTEN, IF NECESSARY
CHECK HEADSET AND TIGHTEN / LOOSEN, IF NECESSARY
THOROUGHLY CLEAN PIVOT POINTS WITH A RAG (DO NOT LUBRICATE)
REPLACE BRAKE PADS, IF NECESSARY
CHECK TIRES FOR WEAR
CHECK SPOKE TENSION, RETENTION IF NECESSARY
CHECK CHAIN FOR WEAR AND REPLACE IF NECESSARY
COMPLETE TUNE-UP PERFORMED BY AN AUTHORIZED YETI DEALER
PART NUMBER
DESCRIPTION
TORQUE (NM)
300030150
UPPER LINK PIVOT
5NM
300030154
LOWER LINK PIVOT
6.5NM
300030249
FRONT SHOCK MOUNT
6.5NM
300020047
MAIN PIVOT AXLE
9NM
300040454
MAIN PIVOT COLLET
13.5NM
SCHEDULE
