Using a well calibrated torque, wrench tighten the
lower link hardware to 6.5 Nm.
Torque to 6.5 Nm
Using a well calibrated torque, wrench tighten the
front shock mounting hardware to 6.5 Nm.
Torque to 6.5 Nm
20.
19.
24.
25.
Use a Fox guide pin to align the link, spacers and
the swingarm.
Slip the front shock mount into the front triangle
and use another Fox guide pin to align and hold
it in place.
pull the lower link guide pin back, leaving it
partially in place. Give yourself clearance for the
rear of the shock to slide into place. Place the
shock into the link and reinsert the guide pin.
Using the guide pin, slide the lower link pivot
hardware through the swingarm, link and shock.
Use a soft mallet to tap it through if necessary.
13.
14.
15.
16.
ASSEMBLY
Using the guide pin slide the front shock
mounting hardware through the frame and shock.
Use a soft mallet to tap it through if necessary.
Apply blue (248) Loctite to the male bolts for the
shock mount and the lower link pivot at this time.
18.
17.
ASSEMBLY
