Yeswelder YWM-211P, Operator'S Manual, Page: 20 / 40

Synergic MIG this is a predefined setting based on Gas and wire used. The machine will preselect voltage and amperage allowing
the user to quickly find the best welding parameters.
Simply select the correct wire diameter and gas type that you’re using then dial in your desired wire feed speed for the job. Use
more wire speed for thicker material and less wire speed for thinner material. The Synergic MIG system will auto-adjust the welding
voltage to give you an ideal arc condition while welding.
How To Choose Synergic MIG
Details for Setting for Manual MIG
Mode: Torch Mode Weld Spec Value
Synergic MIG
Syn on
2T/4T/4TL/Spot ind
：
(-10~10)(%)
2T/4T/4TL/Spot rin 0~10(%)
2T/4T/4TL/Spot hs 0~10(%)
2T/4T/4TL/Spot prg 0~20s
2T/4T/4TL/Spot pog 0~20s
2T/4T/4TL/Spot bbt 0~10(%)
2T/4T/4TL/Spot syn OFF/ON
4TL I1(Stop Amperage) 30~200A
4T/4TL I2(Stop Amperage) 30~200A
SPOT SPT 0~15s
110V
Material size Amp
AL Si 0.9mm/.035" 75~160
AL Si 1.2mm/.045" 90~160
Al Mg 0.9mm/.035" 65~160
Al Mg 1.2mm/.045" 70~160
SS 0.8mm/.030" 40~160
SS 0.9mm/.035" 45~160
Fe Mix 0.6mm/.023" 40~160
Fe Mix 0.8mm/.030" 40~160
Fe Mix 0.9mm/.035" 60~160
Fe CO
2
0.6mm/.023" 40~160
Fe CO
2
0.8mm/.030" 40~160
Fe CO
2
0.9mm/.035" 52~160
220V
Material size Amp
AL Si 0.9mm/.035" 75~200
AL Si 1.2mm/.045" 90~160
Al Mg 0.9mm/.035" 65~200
Al Mg 1.2mm/.045" 70~200
SS 0.8mm/.030" 40~200
SS 0.9mm/.035" 45~200
Fe Mix 0.6mm/.023" 40~200
Fe Mix 0.8mm/.030" 40~200
Fe Mix 0.9mm/.035" 60~200
Fe CO
2
0.6mm/.023" 40~200
Fe CO
2
0.8mm/.030" 40~200
Fe CO
2
0.9mm/.035" 52~200
1. Enter the menu button (6).
2. Select the weld spec.
3. Find the parameter Syn and turn on it via Value Adjustment/Gas Checking Knob (1).
4. Adjust the value adjustment knob (1) to change the output amperage, the wire feeding speed will automatically changed.
5. Adjust the Voltage/Function knob (2) to fine-adjust the voltage from -3~3V.
- 16 -